11 workshops, one roof
Stamping, laser cutting, CNC bending, welding, polishing and assembly all run in-house, so tolerances are held from the first blank to the final finish.
Main photo: production sample. More angles and a video are available on request.
cnc aluminium equipment enclosure · Equipment Enclosure
Cnc Aluminium Equipment Enclosure — Custom Made to Your Drawing, MOQ 10 pcs
Aluminium equipment enclosure machined from plate, with matching brackets and panels.
MaterialAluminium / Stainless Steel
SizeCustom (max 4500 mm)
MOQ10 pcs per batch
Lead time4-7 working days
ISO 9000 (quality management system) and CCC held. Inspection records ship with every batch, and third-party inspection is welcome before loading. How we document a shipment
Overview
Cnc aluminium equipment enclosure, fabricated and finished in our own workshops
Tooling, stamping, laser cutting, bending, welding and surface finishing all run in our eleven workshops in Foshan — the part never leaves the plant between steps.
When an enclosure needs a thick boss, a pocket for a heat spreader or a face that stays flat across its whole length, forming alone will not get there. This build starts from aluminium plate and machines the features that a bent sheet cannot hold.
The body is milled, drilled and tapped, then the matching brackets and panels are cut and formed from sheet so the assembly still closes on a gasket. Deburring is done by hand on the machined edges, and the finish is applied with the earth points and the sealing faces masked.
Send the assembly model and say which faces are datum. We decide what is machined and what is formed, quote both, and keep the two processes in one production file so the parts meet at assembly.
This part runs at 10 pcs per batch, with the die designed and maintained in our own tool shop. If you need a smaller trial before committing to the run, say so in the enquiry and we will quote the two quantities side by side.
Electronic equipmentEV chargingIndustrial controlInstrumentationPower supplyTelecommunications
Specifications
Technical data
Values below describe our standard process window for this product line. Tighter tolerances and other alloys are quoted case by case.
| Material | Aluminium, with stainless brackets where needed |
|---|---|
| External size | Custom, up to 4,500 mm |
| Wall thickness | Machined from plate; thickness to your drawing |
| Machining | Milled pockets, bosses, tapped holes and sealing faces |
| Matching parts | Brackets and panels cut and formed from sheet |
| Finish | Anodised or powder coated, with masked earth and seal faces |
| Inspection | Critical dimensions measured against the model |
| Drawing files | PDF, DWG, DXF, STEP or a physical sample |
| MOQ | 10 pcs |
| Lead time | 4 to 7 working days after drawing approval |
Send a drawing for a part-specific data sheet.
Why this drawing matters. Every tolerance, hole position and bend radius on this page is confirmed against a drawing during quotation — so what you approve is what gets inspected at the end of the line. The published drawing is a generic sample, never a customer's file.
Certifications we hold
- ISO 9000 — quality management system, covering incoming material, in-process and final inspection.
- CCC — China Compulsory Certification, the domestic market access mark.
What ships with the goods
- Batch inspection record — dimensional and appearance report for the production run, issued in English.
- Material certificate — mill certificate for the steel or aluminium heat, on request.
- Third-party inspection — SGS, TÜV, BV or your own QC are welcome at the plant before loading.
Overseas marks (UL, CE, RoHS, ETL)
These are applied for by the importer in its own market — that is the normal division of labour in this trade. What we do is supply the samples, material data and process records your test house asks for, and manufacture and inspect to whichever standard your drawing names (ASTM, EN, ISO). What we will not do is put a mark on a part we have not tested.
Why this part
Six things that decide whether a custom part arrives right
Every one of them sits inside our own plant, on the same floor as the parts.
26 presses + 350T drawing
160T × 2, 100T × 4, 80T × 8 and 60T × 12 presses, plus a 350T hydraulic press for deep-drawn housings and larger shells.
Runs at 10 pcs
This part is produced in batches of 10 pcs. Tooling is built here, so the die stays with the part and a repeat order does not pay for it twice.
Tooling made in-house
Three utility patents on our own tooling. The die is built and maintained by the same team that runs the press, so a design change moves with the part.
Documented, not decorated
ISO 9000 and CCC held. Each batch leaves with an inspection record, material certificates on request, and third-party inspection is welcome before loading.
Inspect before you pay
SGS, TÜV, BV or your own QC team can walk the line and inspect finished parts at our plant. Reports go to you, not to us.
Production process
How the order runs on our floor
Five steps, in this order, all in Foshan.
1
Drawing review
Send a PDF, DWG, DXF or STEP file. We check material, sheet thickness, tolerance and surface finish, and flag anything that needs adjusting before quoting.
2
Tooling in-house
Dies are designed, cut and maintained in our own tool shop — three utility patents on our tooling. A design change moves with the part.
3
Stamping & forming
26 presses from 60T to 160T, plus a 350T hydraulic press for deep-drawn shells. Laser cutting and CNC bending handle blanks and complex forms.
4
Welding & finishing
Tapping, welding, grinding and polishing complete the part. Surface treatment is specified to your drawing and documented per batch.
5
Inspection & shipment
Incoming checks, in-process checks and a final layout inspection. SGS, TÜV, BV or your own QC team are welcome before loading.
Factory
Made in Foshan since 2004
We run 13,000+ m² across eleven workshops in Foshan, Guangdong, China, with 51–100 staff. Sheet metal is the whole plant: the die is built where the part is stamped, the finish is applied where the part is formed, and a quality question is answered by the people who made the part.
2004Founded in Foshan
13,000+ m²Production floor
11Workshops
51–100Staff
26Presses 60T–160T
350THydraulic deep drawing
3Utility patents on tooling
4Materials: steel / stainless / aluminium / copper
How to order
From drawing to delivery
Four steps, no account required. We reply within one working day.
1 Send your drawing
PDF, DWG, STEP files or a physical sample all work. Tell us the quantity you have in mind — one piece is a valid starting point.
2 Engineering review
We confirm material, tolerance and surface finish, and flag anything that needs adjustment before quoting.
3 Sample first
A prototype is produced in 4-7 days so you can verify fit, finish and assembly before committing to volume.
4 Mass production
Laser cutting, CNC bending, punching, welding and in-house surface treatment are all completed under one roof for consistent quality.
OEM and ODM projects are welcome, and we can support you in meeting your target-market certification requirements. Cnc aluminium equipment enclosure are produced in our Foshan factory, where 26 punch presses plus CNC laser cutting and bending equipment handle both one-off prototypes and repeat production runs.
FAQ
Frequently asked questions
The questions buyers ask most before requesting a quote.
Why machine instead of bend?
A boss, a pocket or a flat face wider than the bend can hold has to be cut from solid. If the shape allows a folded part, we will quote that instead, because it costs less.
Can machined and formed parts be supplied together?
Yes. Both come out of the same production file, so the bracket holes and the tapped holes in the body are positioned from one model.
How are the sealing faces protected during finishing?
They are masked before anodising or coating, so the gasket sits on bare aluminium rather than on a layer of paint.
Which files do you need to quote?
PDF, DWG, DXF, STEP or a physical sample. A sketch with the overall dimensions is enough to start; we tell you what is missing before quoting.
What certificates come with the order?
We hold ISO 9000 for quality management and CCC, the China compulsory certification. Every batch ships with an inspection record, and mill certificates for the material are available on request. Marks such as UL or CE are applied for by the importer in its own market; we supply the samples, material data and process records a test house asks for.
Related products
More from Sheet Metal Enclosures
Equipment Enclosure · MOQ 1 pc
Precision Stainless Steel Sheet Metal Box / Enclosure
View details →
Equipment Enclosure · MOQ 10 pc
Sheet Metal Enclosure Prototyping & Custom Stamping Parts
View details →
Electrical Cabinet · MOQ 1 pc
Custom Stainless Steel Distribution Box / Electrical Enclosure
View details →
Power & EV Enclosure · MOQ 1 pc
EV Charger Enclosure - Precision Sheet Metal Fabrication
View details →Request a quote
Send your drawing — quoted within one working day
Tell us the part, material, dimensions and quantity. PDF, DWG, DXF, STEP files or a physical sample all work. If your enquiry needs an engineer's input we tell you the expected date instead of leaving you waiting.
- Nothing you send is shared with anyone else.
- Include a drawing link or describe the part — we only come back with questions if something is genuinely missing.
- MOQ 10 pcs per batch; custom and OEM projects quoted from your drawing.
Prefer to talk?
WhatsApp / Phone +86 18588672899
gdtokin@gmail.com
Custom CNC Machined Aluminium Equipment Enclosure & Stamping…MOQ 10 pcs · 4-7 working days
Send Your Drawing
◆ WhatsApp