11 workshops, one roof
Stamping, laser cutting, CNC bending, welding, polishing and assembly all run in-house, so tolerances are held from the first blank to the final finish.
Main photo: production sample. More angles and a video are available on request.
custom metal stamping parts · Stamping Parts
Custom Metal Stamping Parts — Custom Made to Your Drawing, MOQ 100 pcs
Stamped and formed metal parts, run on our own dies from your drawing.
MaterialStainless Steel / Aluminium
SizeCustom, 0.5-20 mm thickness
MOQ100 pcs per batch
Lead time4-7 working days
ISO 9000 (quality management system) and CCC held. Inspection records ship with every batch, and third-party inspection is welcome before loading. How we document a shipment
Overview
Custom metal stamping parts, fabricated and finished in our own workshops
Tooling, stamping, laser cutting, bending, welding and surface finishing all run in our eleven workshops in Foshan — the part never leaves the plant between steps.
A stamped part is bought for one reason: the same geometry, part after part, at a price a machined part cannot reach. The die decides the burr side, the flatness and the position of every hole, so the drawing review matters more than the press.
We build the die in our own tool shop, then run it on presses from 60T to 160T. Blanks are cut, formed and pierced in one or two operations, depending on the shape. Parts are deburred and, where the drawing calls for it, tumbled or polished before packing.
Send a drawing with the material, thickness, tolerance and the burr direction. We quote the part and the tooling separately, so you can see what the die costs against the run size. A sample from the first-off is sent before the batch continues.
This part runs at 100 pcs per batch, with the die designed and maintained in our own tool shop. If you need a smaller trial before committing to the run, say so in the enquiry and we will quote the two quantities side by side.
AutomotiveDrone framesElectrical cabinetsHome appliancesMachinery assembliesConstruction Hardware
Specifications
Technical data
Values below describe our standard process window for this product line. Tighter tolerances and other alloys are quoted case by case.
| Material | Stainless steel, cold-rolled steel, galvanised steel or aluminium |
|---|---|
| Thickness | Typical 0.5 to 20 mm, set on your drawing |
| Process | Blanking, piercing, forming and bending on our own dies |
| Presses | 60T to 160T, plus a 350T hydraulic press for deeper forms |
| Tolerance | Per drawing; critical dimensions called out at review |
| Burr | Deburred by default; burr direction stated on request |
| Finish | Tumbling, polishing, plating or powder coating |
| Tooling | Die designed and maintained in-house; cost quoted separately |
| MOQ | 100 pcs |
| Lead time | 4 to 7 working days after drawing approval |
Send a drawing for a part-specific data sheet.
Why this drawing matters. Every tolerance, hole position and bend radius on this page is confirmed against a drawing during quotation — so what you approve is what gets inspected at the end of the line. The published drawing is a generic sample, never a customer's file.
Certifications behind the batch
- ISO 9000 — the quality management system our stamping and forming lines run under, from incoming material to final inspection.
- CCC — China Compulsory Certification, the domestic market access mark.
Paperwork that travels with the goods
- Batch inspection record — the production run's dimensional and appearance checks, reported in English.
- Material certificate — the mill certificate for the steel or aluminium heat, on request.
- Third-party inspection — SGS, TÜV, BV or your own QC are welcome at the plant before loading.
UL, CE, RoHS, ETL
Overseas marks are applied for by the importer in its own market — the normal division of labour in this trade. Our side of it: samples, material data and process records for your test house, and manufacture and inspection to the standard your drawing names (ASTM, EN, ISO). A mark goes on nothing we have not tested.
Why this part
Six things that decide whether a custom part arrives right
Every one of them sits inside our own plant, on the same floor as the parts.
26 presses + 350T drawing
160T × 2, 100T × 4, 80T × 8 and 60T × 12 presses, plus a 350T hydraulic press for deep-drawn housings and larger shells.
Runs at 100 pcs
This part is produced in batches of 100 pcs. Tooling is built here, so the die stays with the part and a repeat order does not pay for it twice.
Tooling made in-house
Three utility patents on our own tooling. The die is built and maintained by the same team that runs the press, so a design change moves with the part.
Documented, not decorated
ISO 9000 and CCC held. Each batch leaves with an inspection record, material certificates on request, and third-party inspection is welcome before loading.
Inspect before you pay
SGS, TÜV, BV or your own QC team can walk the line and inspect finished parts at our plant. Reports go to you, not to us.
Production process
How the order runs on our floor
Five steps, in this order, all in Foshan.
1
Drawing review
Send a PDF, DWG, DXF or STEP file. We check material, sheet thickness, tolerance and surface finish, and flag anything that needs adjusting before quoting.
2
Tooling in-house
Dies are designed, cut and maintained in our own tool shop — three utility patents on our tooling. A design change moves with the part.
3
Stamping & forming
26 presses from 60T to 160T, plus a 350T hydraulic press for deep-drawn shells. Laser cutting and CNC bending handle blanks and complex forms.
4
Welding & finishing
Tapping, welding, grinding and polishing complete the part. Surface treatment is specified to your drawing and documented per batch.
5
Inspection & shipment
Incoming checks, in-process checks and a final layout inspection. SGS, TÜV, BV or your own QC team are welcome before loading.
Factory
Made in Foshan since 2004
We run 13,000+ m² across eleven workshops in Foshan, Guangdong, China, with 51–100 staff. Sheet metal is the whole plant: the die is built where the part is stamped, the finish is applied where the part is formed, and a quality question is answered by the people who made the part.
2004Founded in Foshan
13,000+ m²Production floor
11Workshops
51–100Staff
26Presses 60T–160T
350THydraulic deep drawing
3Utility patents on tooling
4Materials: steel / stainless / aluminium / copper
How to order
From drawing to delivery
Four steps, no account required. We reply within one working day.
1 Send your drawing
PDF, DWG, STEP files or a physical sample all work. Tell us the quantity you have in mind — one piece is a valid starting point.
2 Engineering review
We confirm material, tolerance and surface finish, and flag anything that needs adjustment before quoting.
3 Sample first
A prototype is produced in 4-7 days so you can verify fit, finish and assembly before committing to volume.
4 Mass production
Laser cutting, CNC bending, punching, welding and in-house surface treatment are all completed under one roof for consistent quality.
OEM and ODM projects are welcome, and we can support you in meeting your target-market certification requirements. Custom metal stamping parts are produced in our Foshan factory, where 26 punch presses plus CNC laser cutting and bending equipment handle both one-off prototypes and repeat production runs.
FAQ
Frequently asked questions
The questions buyers ask most before requesting a quote.
Who owns the tooling?
The die is built for your part. Ownership and where it is stored are agreed at the quotation stage, so there is no argument later if you move the work.
Which way should the burr face?
That is your call and it goes on the drawing. If it is not stated, we deburr both sides so the part is safe to handle either way up.
Can you run a part that is already in production elsewhere?
Yes. Send a sample and the drawing; the die is reverse-checked against the sample so the parts interchange.
What do you need to quote a part?
A drawing with material, thickness and the dimensions that matter, or a STEP file plus those notes. A sample also works: it is measured and the drawing is built from it.
What certificates come with the order?
We hold ISO 9000 for quality management and CCC, the China compulsory certification. Every batch ships with an inspection record, and mill certificates for the material are available on request. Marks such as UL or CE are applied for by the importer in its own market; we supply the samples, material data and process records a test house asks for.
Related products
More from Sheet Metal Parts
Stamping Parts · MOQ on quote
Custom Stamping & Welding Parts for Automotive / Machinery / Appliances
View details →
Stamping Parts · MOQ 1 pc
Precision Stainless Steel Sheet Metal Parts - Cutting, Stamping & Forming
View details →
Stamping Parts · MOQ 1 pc
Custom Galvanized Sheet Metal Parts - Laser Cutting, Bending & Welding
View details →
Stamping Parts · MOQ 10 pc
Electrical Cabinet Sheet Metal Parts - Laser Cutting, Riveting & Bending
View details →Request a quote
Send your drawing — quoted within one working day
Tell us the part, material, dimensions and quantity. PDF, DWG, DXF, STEP files or a physical sample all work. If your enquiry needs an engineer's input we tell you the expected date instead of leaving you waiting.
- Nothing you send is shared with anyone else.
- Include a drawing link or describe the part — we only come back with questions if something is genuinely missing.
- MOQ 100 pcs per batch; custom and OEM projects quoted from your drawing.
Prefer to talk?
WhatsApp / Phone +86 18588672899
gdtokin@gmail.com
Custom Metal Stamping Parts – Stainless Steel /…MOQ 100 pcs · 4-7 working days
Send Your Drawing
◆ WhatsApp