11 workshops, one roof
Stamping, laser cutting, CNC bending, welding, polishing and assembly all run in-house, so tolerances are held from the first blank to the final finish.
Main photo: production sample. More angles and a video are available on request.
custom stamping and welding parts · Stamping Parts
Custom Stamping And Welding Parts — Custom Made to Your Drawing, MOQ Quoted on Request
Stamped, formed and welded parts in thicker plate for OEM assembly lines.
MaterialStainless Steel / Steel Plate
SizeCustom, thickness up to 25 mm
MOQQuoted per drawing and annual volume
Lead time4-7 working days
ISO 9000 (quality management system) and CCC held. Inspection records ship with every batch, and third-party inspection is welcome before loading. How we document a shipment
Overview
Custom stamping and welding parts, fabricated and finished in our own workshops
Tooling, stamping, laser cutting, bending, welding and surface finishing all run in our eleven workshops in Foshan — the part never leaves the plant between steps.
Structural brackets, mounts and frames are bought in volume by assembly plants, and the part has to arrive ready to bolt on: holes in position, weld spatter gone, edges safe for the line operator.
Plate is cut, formed and welded into a jig so the hole pattern stays true across the run, then the weld is dressed and the part is checked against a fixture. Heavier plate is cut and formed rather than stamped, because a die for that thickness costs more than the run usually justifies.
Send the assembly drawing with the weld symbols and the fixture points. We build the jig, run the first article against it, and then produce at volume with the same check at the end of the line.
Volume is set per part. Send the drawing and the annual call-off, and we quote the run with tooling designed and maintained in our own tool shop.
AutomotiveDrone framesElectrical cabinetsHome appliancesMachinery assembliesConstruction Hardware
Specifications
Technical data
Values below describe our standard process window for this product line. Tighter tolerances and other alloys are quoted case by case.
| Material | Stainless steel or steel plate |
|---|---|
| Thickness | Up to 25 mm, set on your drawing |
| Process | Cutting, forming, jig-welded assembly, dressing |
| Welding | MIG or TIG, welded in a fixture to hold the hole pattern |
| Tolerance | Checked against a fixture; critical holes called out at review |
| Finish | Shot blasting, primer, powder coating or plating |
| Packing | Bulk or returnable racks, to suit your line side |
| MOQ | Quoted per drawing and annual volume |
| Lead time | 4 to 7 working days after drawing approval |
Send a drawing for a part-specific data sheet.
Why this drawing matters. Every tolerance, hole position and bend radius on this page is confirmed against a drawing during quotation — so what you approve is what gets inspected at the end of the line. The published drawing is a generic sample, never a customer's file.
Certifications behind the batch
- ISO 9000 — the quality management system our stamping and forming lines run under, from incoming material to final inspection.
- CCC — China Compulsory Certification, the domestic market access mark.
Paperwork that travels with the goods
- Batch inspection record — the production run's dimensional and appearance checks, reported in English.
- Material certificate — the mill certificate for the steel or aluminium heat, on request.
- Third-party inspection — SGS, TÜV, BV or your own QC are welcome at the plant before loading.
UL, CE, RoHS, ETL
Overseas marks are applied for by the importer in its own market — the normal division of labour in this trade. Our side of it: samples, material data and process records for your test house, and manufacture and inspection to the standard your drawing names (ASTM, EN, ISO). A mark goes on nothing we have not tested.
Why this part
Six things that decide whether a custom part arrives right
Every one of them sits inside our own plant, on the same floor as the parts.
26 presses + 350T drawing
160T × 2, 100T × 4, 80T × 8 and 60T × 12 presses, plus a 350T hydraulic press for deep-drawn housings and larger shells.
Quoted per drawing
Quantity is agreed per part and per call-off. Send the drawing and the annual volume, and we quote the run with tooling built here.
Tooling made in-house
Three utility patents on our own tooling. The die is built and maintained by the same team that runs the press, so a design change moves with the part.
Documented, not decorated
ISO 9000 and CCC held. Each batch leaves with an inspection record, material certificates on request, and third-party inspection is welcome before loading.
Inspect before you pay
SGS, TÜV, BV or your own QC team can walk the line and inspect finished parts at our plant. Reports go to you, not to us.
Production process
How the order runs on our floor
Five steps, in this order, all in Foshan.
1
Drawing review
Send a PDF, DWG, DXF or STEP file. We check material, sheet thickness, tolerance and surface finish, and flag anything that needs adjusting before quoting.
2
Tooling in-house
Dies are designed, cut and maintained in our own tool shop — three utility patents on our tooling. A design change moves with the part.
3
Stamping & forming
26 presses from 60T to 160T, plus a 350T hydraulic press for deep-drawn shells. Laser cutting and CNC bending handle blanks and complex forms.
4
Welding & finishing
Tapping, welding, grinding and polishing complete the part. Surface treatment is specified to your drawing and documented per batch.
5
Inspection & shipment
Incoming checks, in-process checks and a final layout inspection. SGS, TÜV, BV or your own QC team are welcome before loading.
Factory
Made in Foshan since 2004
We run 13,000+ m² across eleven workshops in Foshan, Guangdong, China, with 51–100 staff. Sheet metal is the whole plant: the die is built where the part is stamped, the finish is applied where the part is formed, and a quality question is answered by the people who made the part.
2004Founded in Foshan
13,000+ m²Production floor
11Workshops
51–100Staff
26Presses 60T–160T
350THydraulic deep drawing
3Utility patents on tooling
4Materials: steel / stainless / aluminium / copper
How to order
From drawing to delivery
Four steps, no account required. We reply within one working day.
1 Send your drawing
PDF, DWG, STEP files or a physical sample all work. Tell us the quantity you have in mind — one piece is a valid starting point.
2 Engineering review
We confirm material, tolerance and surface finish, and flag anything that needs adjustment before quoting.
3 Sample first
A prototype is produced in 4-7 days so you can verify fit, finish and assembly before committing to volume.
4 Mass production
Laser cutting, CNC bending, punching, welding and in-house surface treatment are all completed under one roof for consistent quality.
OEM and ODM projects are welcome, and we can support you in meeting your target-market certification requirements. Custom stamping and welding parts are produced in our Foshan factory, where 26 punch presses plus CNC laser cutting and bending equipment handle both one-off prototypes and repeat production runs.
FAQ
Frequently asked questions
The questions buyers ask most before requesting a quote.
Do you make the welding fixture?
Yes. The jig is part of the setup and it is what keeps hole positions consistent across thousands of parts.
Can you supply on a Kanban or scheduled call-off?
Volume parts are usually called off against a schedule rather than ordered one batch at a time. Tell us the monthly rate and we plan the run.
How is spatter handled?
Welds are dressed and the part is cleaned before finishing; on a painted part, that step is what stops spatter showing through the coat.
What do you need to quote a part?
A drawing with material, thickness and the dimensions that matter, or a STEP file plus those notes. A sample also works: it is measured and the drawing is built from it.
What certificates come with the order?
We hold ISO 9000 for quality management and CCC, the China compulsory certification. Every batch ships with an inspection record, and mill certificates for the material are available on request. Marks such as UL or CE are applied for by the importer in its own market; we supply the samples, material data and process records a test house asks for.
Related products
More from Sheet Metal Parts
Stamping Parts · MOQ 1 pc
Precision Stainless Steel Sheet Metal Parts - Cutting, Stamping & Forming
View details →
Stamping Parts · MOQ 1 pc
Custom Galvanized Sheet Metal Parts - Laser Cutting, Bending & Welding
View details →
Stamping Parts · MOQ 10 pc
Electrical Cabinet Sheet Metal Parts - Laser Cutting, Riveting & Bending
View details →
Perforated & Mesh · MOQ 10 pc
Perforated Metal Filter Screen / Sieve Plate - CNC Punching, Stainless Steel
View details →Request a quote
Send your drawing — quoted within one working day
Tell us the part, material, dimensions and quantity. PDF, DWG, DXF, STEP files or a physical sample all work. If your enquiry needs an engineer's input we tell you the expected date instead of leaving you waiting.
- Nothing you send is shared with anyone else.
- Include a drawing link or describe the part — we only come back with questions if something is genuinely missing.
- MOQ Quoted per drawing and annual volume.
Prefer to talk?
WhatsApp / Phone +86 18588672899
gdtokin@gmail.com
Custom Stamping & Welding Parts for Automotive /…MOQ Quoted · 4-7 working days
Send Your Drawing
◆ WhatsApp