11 workshops, one roof
Stamping, laser cutting, CNC bending, welding, polishing and assembly all run in-house, so tolerances are held from the first blank to the final finish.
Main photo: production sample. More angles and a video are available on request.
perforated metal filter screen · Perforated & Mesh
Perforated Metal Filter Screen — Custom Made to Your Drawing, MOQ 10 pcs
Punched filter screens and sieve plates, with the hole pattern and open area to your spec.
MaterialStainless Steel
SizeCustom hole pattern, 0.5-20 mm thickness
MOQ10 pcs per batch
Lead time4-7 working days
ISO 9000 (quality management system) and CCC held. Inspection records ship with every batch, and third-party inspection is welcome before loading. How we document a shipment
Overview
Perforated metal filter screen, fabricated and finished in our own workshops
Tooling, stamping, laser cutting, bending, welding and surface finishing all run in our eleven workshops in Foshan — the part never leaves the plant between steps.
A screen does its job through the hole: size, pitch, open area and the thickness of the sheet decide what passes and what stays. Get the pattern right and the screen is a part; get it wrong and it is a blockage.
Holes are punched on a CNC turret press from a pattern you specify, with the burr side controlled so the screen sits flat in its frame. Large panels are run in one hit where the table allows, so the pattern does not show a join. Sieve plates are checked for flatness after punching, because a wavy plate will not seal.
Send the hole diameter, the pitch, the open area and the frame dimensions. If you only know the flow rate and the particle size, send those and we propose a pattern. Sheets can be supplied flat, rolled or cut to a frame profile.
This part runs at 10 pcs per batch, with the die designed and maintained in our own tool shop. If you need a smaller trial before committing to the run, say so in the enquiry and we will quote the two quantities side by side.
AutomotiveDrone framesElectrical cabinetsHome appliancesMachinery assembliesConstruction Hardware
Specifications
Technical data
Values below describe our standard process window for this product line. Tighter tolerances and other alloys are quoted case by case.
| Material | Stainless steel, or galvanised and cold-rolled steel |
|---|---|
| Sheet size | Custom, up to 4,500 mm |
| Thickness | Typical 0.5 to 20 mm, set on your drawing |
| Hole pattern | Round, square or slotted; diameter and pitch to your spec |
| Open area | Calculated from the pattern and quoted with the drawing |
| Process | CNC turret punching, with the burr side controlled |
| Flatness | Checked after punching; rolled screens on request |
| Finish | Deburred, pickled and passivated, or powder coated |
| MOQ | 10 pcs |
| Lead time | 4 to 7 working days after drawing approval |
Send a drawing for a part-specific data sheet.
Why this drawing matters. Every tolerance, hole position and bend radius on this page is confirmed against a drawing during quotation — so what you approve is what gets inspected at the end of the line. The published drawing is a generic sample, never a customer's file.
Certifications behind the batch
- ISO 9000 — the quality management system our stamping and forming lines run under, from incoming material to final inspection.
- CCC — China Compulsory Certification, the domestic market access mark.
Paperwork that travels with the goods
- Batch inspection record — the production run's dimensional and appearance checks, reported in English.
- Material certificate — the mill certificate for the steel or aluminium heat, on request.
- Third-party inspection — SGS, TÜV, BV or your own QC are welcome at the plant before loading.
UL, CE, RoHS, ETL
Overseas marks are applied for by the importer in its own market — the normal division of labour in this trade. Our side of it: samples, material data and process records for your test house, and manufacture and inspection to the standard your drawing names (ASTM, EN, ISO). A mark goes on nothing we have not tested.
Why this part
Six things that decide whether a custom part arrives right
Every one of them sits inside our own plant, on the same floor as the parts.
26 presses + 350T drawing
160T × 2, 100T × 4, 80T × 8 and 60T × 12 presses, plus a 350T hydraulic press for deep-drawn housings and larger shells.
Runs at 10 pcs
This part is produced in batches of 10 pcs. Tooling is built here, so the die stays with the part and a repeat order does not pay for it twice.
Tooling made in-house
Three utility patents on our own tooling. The die is built and maintained by the same team that runs the press, so a design change moves with the part.
Documented, not decorated
ISO 9000 and CCC held. Each batch leaves with an inspection record, material certificates on request, and third-party inspection is welcome before loading.
Inspect before you pay
SGS, TÜV, BV or your own QC team can walk the line and inspect finished parts at our plant. Reports go to you, not to us.
Production process
How the order runs on our floor
Five steps, in this order, all in Foshan.
1
Drawing review
Send a PDF, DWG, DXF or STEP file. We check material, sheet thickness, tolerance and surface finish, and flag anything that needs adjusting before quoting.
2
Tooling in-house
Dies are designed, cut and maintained in our own tool shop — three utility patents on our tooling. A design change moves with the part.
3
Stamping & forming
26 presses from 60T to 160T, plus a 350T hydraulic press for deep-drawn shells. Laser cutting and CNC bending handle blanks and complex forms.
4
Welding & finishing
Tapping, welding, grinding and polishing complete the part. Surface treatment is specified to your drawing and documented per batch.
5
Inspection & shipment
Incoming checks, in-process checks and a final layout inspection. SGS, TÜV, BV or your own QC team are welcome before loading.
Factory
Made in Foshan since 2004
We run 13,000+ m² across eleven workshops in Foshan, Guangdong, China, with 51–100 staff. Sheet metal is the whole plant: the die is built where the part is stamped, the finish is applied where the part is formed, and a quality question is answered by the people who made the part.
2004Founded in Foshan
13,000+ m²Production floor
11Workshops
51–100Staff
26Presses 60T–160T
350THydraulic deep drawing
3Utility patents on tooling
4Materials: steel / stainless / aluminium / copper
How to order
From drawing to delivery
Four steps, no account required. We reply within one working day.
1 Send your drawing
PDF, DWG, STEP files or a physical sample all work. Tell us the quantity you have in mind — one piece is a valid starting point.
2 Engineering review
We confirm material, tolerance and surface finish, and flag anything that needs adjustment before quoting.
3 Sample first
A prototype is produced in 4-7 days so you can verify fit, finish and assembly before committing to volume.
4 Mass production
Laser cutting, CNC bending, punching, welding and in-house surface treatment are all completed under one roof for consistent quality.
OEM and ODM projects are welcome, and we can support you in meeting your target-market certification requirements. Perforated metal filter screen are produced in our Foshan factory, where 26 punch presses plus CNC laser cutting and bending equipment handle both one-off prototypes and repeat production runs.
FAQ
Frequently asked questions
The questions buyers ask most before requesting a quote.
Can you work out the open area for me?
Yes. Give us the hole size and pitch and we return the open area as a percentage, or work backwards from the flow you need.
Which side should the burr be on?
On a filter screen the burr usually faces away from the flow so particles do not catch on it. Say which side is the dirty side and we set the punch direction.
Can the screen be rolled to fit a drum?
Screens can be supplied rolled to a radius, with the ends left for you to weld or clamp.
What do you need to quote a part?
A drawing with material, thickness and the dimensions that matter, or a STEP file plus those notes. A sample also works: it is measured and the drawing is built from it.
What certificates come with the order?
We hold ISO 9000 for quality management and CCC, the China compulsory certification. Every batch ships with an inspection record, and mill certificates for the material are available on request. Marks such as UL or CE are applied for by the importer in its own market; we supply the samples, material data and process records a test house asks for.
Related products
More from Sheet Metal Parts
Metal Box · MOQ 1 pc
Custom Shaped Metal Box - CNC Bending & Polished Sheet Metal Fabrication
View details →
Drone & Custom Parts · MOQ 200 pc
Custom Drone Parts - Sheet Metal Welding & Bending
View details →
Stamping Parts · MOQ 100 pc
Custom Metal Stamping Parts - Stainless Steel / Aluminium Bending & Forming
View details →
Stamping Parts · MOQ on quote
Custom Stamping & Welding Parts for Automotive / Machinery / Appliances
View details →Request a quote
Send your drawing — quoted within one working day
Tell us the part, material, dimensions and quantity. PDF, DWG, DXF, STEP files or a physical sample all work. If your enquiry needs an engineer's input we tell you the expected date instead of leaving you waiting.
- Nothing you send is shared with anyone else.
- Include a drawing link or describe the part — we only come back with questions if something is genuinely missing.
- MOQ 10 pcs per batch; custom and OEM projects quoted from your drawing.
Prefer to talk?
WhatsApp / Phone +86 18588672899
gdtokin@gmail.com
Perforated Metal Filter Screen / Sieve Plate –…MOQ 10 pcs · 4-7 working days
Send Your Drawing
◆ WhatsApp