11 workshops, one roof
Stamping, laser cutting, CNC bending, welding, polishing and assembly all run in-house, so tolerances are held from the first blank to the final finish.
Main photo: production sample. More angles and a video are available on request.
heavy duty drawer slides · Wardrobe Tracks
Heavy Duty Drawer Slides — Custom Made to Your Drawing, 1-Piece MOQ in Stock
Central drawer slides and wardrobe door tracks for heavy, wide fronts.
MaterialSteel / Stainless Steel
SizeCustom lengths
MOQ1 pc on in-stock items
Lead time3-7 days
ISO 9000 (quality management system) and CCC held. Inspection records ship with every batch, and third-party inspection is welcome before loading. How we document a shipment
Overview
Heavy duty drawer slides, fabricated and finished in our own workshops
Tooling, stamping, laser cutting, bending, welding and surface finishing all run in our eleven workshops in Foshan — the part never leaves the plant between steps.
A wide drawer or a sliding wardrobe door puts the load in the middle, where a pair of side slides cannot help. A central slide carries it under the drawer, and a top or bottom track carries a door that would otherwise rack in its frame.
The profile is roll-formed from steel, with the running surfaces plated after forming, and the carrier is fitted with bearings that are adjusted for play before packing. Tracks are cut to length and drilled to the fixing pattern of your carcass, so a door hangs square without packing shims behind the track.
Send the drawer width, the door weight and the carcass dimensions. The profile is selected against the load and the length, and the fixing holes are put where your cabinet needs them rather than on a fixed pitch.
In-stock items start at one piece. Custom and OEM projects are quoted from your drawing, with the die designed and maintained in our own tool shop.
Kitchen cabinetsOffice furnitureStorage systemsWardrobesFurniture ManufacturingHardware Distribution
Specifications
Technical data
Values below describe our standard process window for this product line. Tighter tolerances and other alloys are quoted case by case.
| Material | Steel, stainless steel on request |
|---|---|
| Type | Central drawer slide or sliding door track |
| Length | Cut to your carcass dimension |
| Load | Profile selected against the load you give us |
| Carriage | Bearing carrier, adjusted for play before packing |
| Fixing | Hole pattern drilled to your carcass drawing |
| Finish | Zinc plated after forming |
| MOQ | 1 pc |
| Lead time | 3 to 7 working days |
Send a drawing for a part-specific data sheet.
Why this drawing matters. Every tolerance, hole position and bend radius on this page is confirmed against a drawing during quotation — so what you approve is what gets inspected at the end of the line. The published drawing is a generic sample, never a customer's file.
What we are certified for
- ISO 9000 — the quality management system behind our stamping, finishing and assembly, from incoming material to final inspection.
- CCC — China Compulsory Certification, the domestic market access mark.
What comes with your order
- Batch inspection record — dimensional and appearance checks for the run, written up in English.
- Material certificate — mill certificate for the steel or aluminium heat, on request.
- Third-party inspection — SGS, TÜV, BV or your own QC are welcome at the plant before loading.
Marks we do not print (UL, CE, RoHS, ETL)
These are applied for by the importer in its own market — the normal division of labour in this trade. What we supply is samples, material data and process records for your test house, and manufacture and inspection to whichever standard your drawing names (ASTM, EN, ISO). No mark goes on a part we have not tested.
Why this part
Six things that decide whether a custom part arrives right
Every one of them sits inside our own plant, on the same floor as the parts.
26 presses + 350T drawing
160T × 2, 100T × 4, 80T × 8 and 60T × 12 presses, plus a 350T hydraulic press for deep-drawn housings and larger shells.
In stock from 1 pc
Standard items ship from stock with no minimum order. Custom and OEM runs are quoted from your drawing, with tooling built here.
Tooling made in-house
Three utility patents on our own tooling. The die is built and maintained by the same team that runs the press, so a design change moves with the part.
Documented, not decorated
ISO 9000 and CCC held. Each batch leaves with an inspection record, material certificates on request, and third-party inspection is welcome before loading.
Inspect before you pay
SGS, TÜV, BV or your own QC team can walk the line and inspect finished parts at our plant. Reports go to you, not to us.
Production process
How the order runs on our floor
Five steps, in this order, all in Foshan.
1
Drawing review
Send a PDF, DWG, DXF or STEP file. We check material, sheet thickness, tolerance and surface finish, and flag anything that needs adjusting before quoting.
2
Tooling in-house
Dies are designed, cut and maintained in our own tool shop — three utility patents on our tooling. A design change moves with the part.
3
Pressing & forming
26 presses from 60T to 160T blank, pierce and form the part, and the same floor bends wire, tube and strip. A component does not travel between suppliers to be finished.
4
Deburring & finishing
Parts are deburred, tumbled where the edge has to be soft, then plated or powder coated. The finish goes on after forming, so the bend and the hole edges are covered.
5
Inspection & shipment
Incoming checks, in-process checks and a final layout inspection. SGS, TÜV, BV or your own QC team are welcome before loading.
Factory
Made in Foshan since 2004
We run 13,000+ m² across eleven workshops in Foshan, Guangdong, China, with 51–100 staff. Sheet metal is the whole plant: the die is built where the part is stamped, the finish is applied where the part is formed, and a quality question is answered by the people who made the part.
2004Founded in Foshan
13,000+ m²Production floor
11Workshops
51–100Staff
26Presses 60T–160T
350THydraulic deep drawing
3Utility patents on tooling
4Materials: steel / stainless / aluminium / copper
How to order
From drawing to delivery
Four steps, no account required. We reply within one working day.
1 Send your drawing
PDF, DWG, STEP files or a physical sample all work. Tell us the quantity you have in mind — one piece is a valid starting point.
2 Engineering review
We confirm material, tolerance and surface finish, and flag anything that needs adjustment before quoting.
3 Sample first
A prototype is produced in 3-5 days so you can verify fit, finish and assembly before committing to volume.
4 Mass production
Laser cutting, CNC bending, punching, welding and in-house surface treatment are all completed under one roof for consistent quality.
OEM and ODM projects are welcome, and we can support you in meeting your target-market certification requirements. Heavy duty drawer slides are produced in our Foshan factory, where 26 punch presses plus CNC laser cutting and bending equipment handle both one-off prototypes and repeat production runs.
FAQ
Frequently asked questions
The questions buyers ask most before requesting a quote.
How heavy a door can the track take?
It depends on the profile and the number of carriers. Give us the door weight, the width and the height and we select the profile rather than quote a number out of context.
Can the track be cut on site?
It can be cut, but the carrier needs a stop at each end. If the length is not final, order it long and tell us the cut allowance.
Do you drill the fixing holes to our cabinet?
Yes. Send the carcass drawing and the holes are drilled to it, which is what keeps the door square.
Can you quote from a sample instead of a drawing?
Yes. A sample is measured and turned into a drawing for you to confirm. For hardware that is often faster than writing the drawing first.
What certificates come with the order?
We hold ISO 9000 for quality management and CCC, the China compulsory certification. Every batch ships with an inspection record, and mill certificates for the material are available on request. Marks such as UL or CE are applied for by the importer in its own market; we supply the samples, material data and process records a test house asks for.
Related products
More from Furniture Hardware
Cabinet Baskets · MOQ 1 pc
Kitchen Cabinet Corner Pull-Out Basket Frame (Magic Corner)
View details →
Cabinet Baskets · MOQ 1 pc
3-Tier Kitchen Cabinet Pull-Out Basket - Stainless Steel
View details →
Washers & Shims · MOQ 1 pc
Stainless Steel Flat Washers - Custom Non-Standard Sizes
View details →
Washers & Shims · MOQ 1 pc
Ultra-Thin Stainless Steel Shim Washers (U-Type)
View details →Request a quote
Send your drawing — quoted within one working day
Tell us the part, material, dimensions and quantity. PDF, DWG, DXF, STEP files or a physical sample all work. If your enquiry needs an engineer's input we tell you the expected date instead of leaving you waiting.
- Nothing you send is shared with anyone else.
- Include a drawing link or describe the part — we only come back with questions if something is genuinely missing.
- MOQ 1 pc on in-stock items; custom and OEM projects quoted from your drawing.
Prefer to talk?
WhatsApp / Phone +86 18588672899
gdtokin@gmail.com
Heavy-Duty Central Drawer Slides / Wardrobe & Sliding…MOQ 1 pc · 3-7 days
Send Your Drawing
◆ WhatsApp