11 workshops, one roof
Stamping, laser cutting, CNC bending, welding, polishing and assembly all run in-house, so tolerances are held from the first blank to the final finish.
Main photo: production sample. More angles and a video are available on request.
precision sheet metal enclosure · Equipment Enclosure
Precision Sheet Metal Enclosure — Custom Made to Your Drawing, MOQ 10 pcs
Enclosure built to a tight drawing, with milled faces and matched hole positions.
MaterialStainless Steel
SizeCustom (max 4500 mm)
MOQ10 pcs per batch
Lead time4-7 working days
ISO 9000 (quality management system) and CCC held. Inspection records ship with every batch, and third-party inspection is welcome before loading. How we document a shipment
Overview
Precision sheet metal enclosure, fabricated and finished in our own workshops
Tooling, stamping, laser cutting, bending, welding and surface finishing all run in our eleven workshops in Foshan — the part never leaves the plant between steps.
This enclosure is bought when the inside has to line up: a PCB on fixed stand-offs, a connector that must sit flush with the panel, a lid that closes on a gasket without shimming. The work is in the hole positions and the flatness, not in the shape of the box.
Blanks are laser cut, formed on CNC press brakes with angle control, then checked against the drawing before welding. Faces that carry a gasket or a screen are milled after forming, because bending leaves a crown that a 0.2 mm gasket cannot absorb. Hole centres are established from the flat pattern so a folded part still lands on the board.
Send the assembly model, or the board plus the enclosure drawing. We review the fold sequence and tell you if a radius or a relief cut is needed before quoting. First article goes out for fit check, then the run continues on the same tooling.
This part runs at 10 pcs per batch, with the die designed and maintained in our own tool shop. If you need a smaller trial before committing to the run, say so in the enquiry and we will quote the two quantities side by side.
Electronic equipmentEV chargingIndustrial controlInstrumentationPower supplyTelecommunications
Specifications
Technical data
Values below describe our standard process window for this product line. Tighter tolerances and other alloys are quoted case by case.
| Material | Stainless steel, cold-rolled steel or aluminium |
|---|---|
| External size | Custom, up to 4,500 mm |
| Wall thickness | Per drawing |
| Forming | CNC press brake with angle control, laser cut blanks |
| Tolerance | Held to the value on your drawing; call out the critical dimensions |
| Machining | Milled faces, pockets and counterbores after forming |
| Finish | Deburring, polishing, plating or powder coating |
| Inspection | First article report with measured critical dimensions |
| MOQ | 10 pcs |
| Lead time | 4 to 7 working days after drawing approval |
Send a drawing for a part-specific data sheet.
Why this drawing matters. Every tolerance, hole position and bend radius on this page is confirmed against a drawing during quotation — so what you approve is what gets inspected at the end of the line. The published drawing is a generic sample, never a customer's file.
Certifications we hold
- ISO 9000 — quality management system, covering incoming material, in-process and final inspection.
- CCC — China Compulsory Certification, the domestic market access mark.
What ships with the goods
- Batch inspection record — dimensional and appearance report for the production run, issued in English.
- Material certificate — mill certificate for the steel or aluminium heat, on request.
- Third-party inspection — SGS, TÜV, BV or your own QC are welcome at the plant before loading.
Overseas marks (UL, CE, RoHS, ETL)
These are applied for by the importer in its own market — that is the normal division of labour in this trade. What we do is supply the samples, material data and process records your test house asks for, and manufacture and inspect to whichever standard your drawing names (ASTM, EN, ISO). What we will not do is put a mark on a part we have not tested.
Why this part
Six things that decide whether a custom part arrives right
Every one of them sits inside our own plant, on the same floor as the parts.
26 presses + 350T drawing
160T × 2, 100T × 4, 80T × 8 and 60T × 12 presses, plus a 350T hydraulic press for deep-drawn housings and larger shells.
Runs at 10 pcs
This part is produced in batches of 10 pcs. Tooling is built here, so the die stays with the part and a repeat order does not pay for it twice.
Tooling made in-house
Three utility patents on our own tooling. The die is built and maintained by the same team that runs the press, so a design change moves with the part.
Documented, not decorated
ISO 9000 and CCC held. Each batch leaves with an inspection record, material certificates on request, and third-party inspection is welcome before loading.
Inspect before you pay
SGS, TÜV, BV or your own QC team can walk the line and inspect finished parts at our plant. Reports go to you, not to us.
Production process
How the order runs on our floor
Five steps, in this order, all in Foshan.
1
Drawing review
Send a PDF, DWG, DXF or STEP file. We check material, sheet thickness, tolerance and surface finish, and flag anything that needs adjusting before quoting.
2
Tooling in-house
Dies are designed, cut and maintained in our own tool shop — three utility patents on our tooling. A design change moves with the part.
3
Stamping & forming
26 presses from 60T to 160T, plus a 350T hydraulic press for deep-drawn shells. Laser cutting and CNC bending handle blanks and complex forms.
4
Welding & finishing
Tapping, welding, grinding and polishing complete the part. Surface treatment is specified to your drawing and documented per batch.
5
Inspection & shipment
Incoming checks, in-process checks and a final layout inspection. SGS, TÜV, BV or your own QC team are welcome before loading.
Factory
Made in Foshan since 2004
We run 13,000+ m² across eleven workshops in Foshan, Guangdong, China, with 51–100 staff. Sheet metal is the whole plant: the die is built where the part is stamped, the finish is applied where the part is formed, and a quality question is answered by the people who made the part.
2004Founded in Foshan
13,000+ m²Production floor
11Workshops
51–100Staff
26Presses 60T–160T
350THydraulic deep drawing
3Utility patents on tooling
4Materials: steel / stainless / aluminium / copper
How to order
From drawing to delivery
Four steps, no account required. We reply within one working day.
1 Send your drawing
PDF, DWG, STEP files or a physical sample all work. Tell us the quantity you have in mind — one piece is a valid starting point.
2 Engineering review
We confirm material, tolerance and surface finish, and flag anything that needs adjustment before quoting.
3 Sample first
A prototype is produced in 4-7 days so you can verify fit, finish and assembly before committing to volume.
4 Mass production
Laser cutting, CNC bending, punching, welding and in-house surface treatment are all completed under one roof for consistent quality.
OEM and ODM projects are welcome, and we can support you in meeting your target-market certification requirements. Precision sheet metal enclosure are produced in our Foshan factory, where 26 punch presses plus CNC laser cutting and bending equipment handle both one-off prototypes and repeat production runs.
FAQ
Frequently asked questions
The questions buyers ask most before requesting a quote.
What tolerance can you hold?
It depends on the feature. Send the drawing with the dimensions that matter marked and we confirm what each process holds before quoting, rather than promising one number for the whole part.
Can you work from my 3D model only?
A STEP file is enough to build from, but we also need the critical dimensions called out. A model does not say which face is the datum for the board.
Do I get measurement data with the parts?
On request, yes. A first article inspection report lists the critical dimensions with the measured value against the drawing value.
Which files do you need to quote?
PDF, DWG, DXF, STEP or a physical sample. A sketch with the overall dimensions is enough to start; we tell you what is missing before quoting.
What certificates come with the order?
We hold ISO 9000 for quality management and CCC, the China compulsory certification. Every batch ships with an inspection record, and mill certificates for the material are available on request. Marks such as UL or CE are applied for by the importer in its own market; we supply the samples, material data and process records a test house asks for.
Related products
More from Sheet Metal Enclosures
Equipment Enclosure · MOQ 1 pc
Industrial Equipment Sheet Metal Housing - Precision Custom Fabrication
View details →
Equipment Enclosure · MOQ 1 pc
Custom Sheet Metal Computer Case / Enclosure - CNC Machined Stainless Steel
View details →
Power & EV Enclosure · MOQ 5 pc
Custom Sheet Metal Enclosure for Outdoor Portable Power Station
View details →
Server & Network Enclosure · MOQ 1 pc
1U Server / Switch Aluminium Enclosure - Custom Network Device Housing
View details →Request a quote
Send your drawing — quoted within one working day
Tell us the part, material, dimensions and quantity. PDF, DWG, DXF, STEP files or a physical sample all work. If your enquiry needs an engineer's input we tell you the expected date instead of leaving you waiting.
- Nothing you send is shared with anyone else.
- Include a drawing link or describe the part — we only come back with questions if something is genuinely missing.
- MOQ 10 pcs per batch; custom and OEM projects quoted from your drawing.
Prefer to talk?
WhatsApp / Phone +86 18588672899
gdtokin@gmail.com
Precision Sheet Metal Enclosure – Custom CNC Machining…MOQ 10 pcs · 4-7 working days
Send Your Drawing
◆ WhatsApp